New Ebay Spoof circulating via Email

The steps they’ll go to to steal your identity! I just received this in email over the weekend.
The message starts convincing enough, and looks professional too. (click the thumbnail to view a larger version of the email.)

The message subject is “Action Required!” and seems to come from the eBay billing department. Not sure why the billing department would be notifying me of a breach of security instead of some security concern but lets move on. Here is the body of the email with the bad link removed for your security.

Dear eBay Member,

We recently noticed one or more attempts to log in to your eBay account from a foreign IP address and we have reasons to believe that your account was used by a third party without your authorization. If you recently accessed your account while traveling, the unusual login attempts may have been initiated by you.

The login attempt was made from:
IP address: 172.25.210.66
ISP Host: cache-66.proxy.aol.com

By now, we used many techniques to verify the accuracy of the information our users provide us when they register on the Site. However, because user verification on the Internet is difficult, eBay cannot and does not confirm each user’s purported identity. Thus, we have established an offline verification system to help you evaluate with whom you are dealing with. Experiencing short-term ED is not a big viagra for sale india https://www.unica-web.com/watch/2018/reverse.html problem as it is the problem with the brain, not with the veins but it is the malfunction of the smooth muscle, which actually surrounds the veins. Thus along with this you also need to take soft viagra tablets just before sex, as it is able to treat erectile dysfunction but this is not correct it is not a disease in itself, but it is related with several health conditions that can be dangerous to the body. canadian pharmacy for viagra Apcalis is used to treat men who have impotence. The reason was detected by the doctors there were very few symptoms which were seen in these people and they were stress and the main was the improper levitra vs cialis supply of blood to his penis.

click on the link below, fill the form and then submit as we will verify

Please save the above link for your reference

Please Note: – If you choose to ignore our request, you
leave us no choice but to temporally suspend your account.

* Please do not respond to this e-mail as
your reply will not be received

Just a few questions I had immediately after seeing this in my deleted bin.

  1. Why is the billing department sending me this message?
  2. Why would I not call eBay to verify an online breach?
  3. There are obvious grammatical errors in the body of the email…this is a huge indicator for me!
  4. They describe the verification method as “offline” yet they are asking me to click a link.

A simple mouseover proved the easiest clue that something was awry! Allowing my mouse cursor to hover over the link provided indicated that the real address was not the one listed in the email.

The wanted me to visit a site that was dynamic (php enabled) and that included the word “superbho” (read that as a HiJack attempt or browser helper object) and was not part of eBay’s DNS group, but was rather originating from 67.138.240.14. A quick visit to Internic determined that this address was not assigned to eBay.

Moral of the story: Use common sense to thwart these spoof attempts and don’t be pressured into clicking links for any reason. ( …you leave us no choice but to temporally suspend your account… He he he!)

See this eBay informational page for more info about how these attempts work.

For more information on some previous attempts see this link.

BIM Deployment Conference

I guess the cats out of the bag on this one. Here is the official release received via email earlier today. I post it here for your reading pleasure.

Industry Experts to Explore Building Information Modeling Atlanta, GA, February 23, 2005 —

As building owners increasingly demand smarter ways to design, document and deliver their building projects, an approach called building information modeling (BIM) is poised to “cross the chasm” from pioneering technology to mainstream adoption. On April 19­­20,2005, leading experts, solution providers and users of this technology will meet at the Global Learning and Conference Center on the campus of Georgia Tech in Atlanta to explore the challenges and opportunities of BIM, as well as the processes necessary for successful deployment. Organized and hosted jointly by the Georgia Tech College of Architecture (COA) Ph.D. Program and the LaiserinLetter™ technology advisory service, this conference includes real-world case studies and interactive panels, as well as industry applications and analyses essential to everyone who owns, operates,constructs or designs buildings.

Links to audience registration and the conference agenda are available on the web at http://www.laiserin.com/laiserinlive/index.php or by contacting:

Mrs. Sports Osteopaths often approach rehabilitation with non-surgical treatments cheap 25mg viagra to relieve pain, prevent future injury, and promote healing. Dose: This drug ought to order generic viagra icks.org just be taken when required. It also cheap generic levitra improves size of the male organ and offers effective cure for male impotence and sexual weakness. generic india viagra The organs that make up the endocrine framework incorporate the pineal, hypothalamus, pituitary, thyroid, parathyroid, thymus, adrenals, pancreas, ovaries and testicles. Mercedes Saghini
mercedes.saghini@coa.gatech.edu
phone +1 (404)894-3476.

Sponsorship information, for vendors of qualified technology solutions, may be obtained by contacting:

Jerry Laiserin
gatechbim@laiserin.com
phone +1 (917) 225-7058.

The conference will examine the ways that BIM “offers fundamentally new opportunities for improving the quality of design, shortening the building procurement life cycle, and reducing costs,” according to Charles Eastman, Building Product Models. Both public and private building owners are beginning to recognize these benefits. A key confirmation of this trend is the US General Services Administration’s (GSA) requirement for a BIM approach at the concept design phase of all projects starting in fiscal year 2006 (which begins October 2005). Notes Eastman, “the issue no longer is why or when to adopt BIM, but how to effectively deploy it now.”

LaiserinLetter™ editor Jerry Laiserin, founding director of the aecXML project for industry data exchange and widely credited with standardizing and popularizing the terminology of BIM, observes that “the multi-dimensional, data-rich models of the BIM approach enable contractors,engineers, architects and building product manufacturers to work as a tightly integrated team helping owner-operators build smarter.” Case study and application presentations at the conference illustrating such teamwork include BIM for Steel Construction, BIM for Precast Concrete Construction,BIM for Energy Analysis, BIM for Project Delivery and BIM for Industry Integration, as well as BIM for Owners. Panel presentations include leading providers of technology solutions in each of these areas. With the BIM approach finally “ready for prime time,” this Georgia Tech/LaiserinLetter™ conference offers important business and professional knowledge critical to every executive and manager in the building enterprise.

=========================
Conference on Building Information Modeling:Challenges, Opportunities, Processes, Deployment April 19­20, 2005­ Atlanta, Georgia, USA
http://tinyurl.com/5tqym

Building Information Modeling (BIM) Conference Announced

Georgia Tech and Jerry Laiserin are teaming up to bring you a conference on BIM, deployment, and strategy.

Buildings. Whether you own, operate, construct or design them, or provide
services and materials for building, you’ll want to take this sneak peek at a
conference that will mark a tipping point His skill set covers generic cialis australia the range of supply chain management processes from strategic procurement, production and inventory control, distribution logistics, information systems and improvement. Alternative Natural Herbal Medicines TreatmentThese are the major cause of erectile dysfunction in men. viagra pfizer cialis amerikabulteni.com It is essential and never to be misses out. generic cialis cheapest Pelvic Floor exercises amerikabulteni.com cialis 10 mg during Pregnancy and Sex If you have conceived or you are planning to be a mother, you should start pelvic Floor exercises immediately. in the way you do business in the
future. This landmark event is a Conference on Building Information Modeling:
Challenges, Opportunities, Processes, Deployment — and is jointly produced and
hosted by GeorgiaTech and The LaiserinLetter(tm).

Read the press release here:
http://tinyurl.com/4s4kr

View the brochure/agenda here:
http://tinyurl.com/5vk7k

Register here:
http://tinyurl.com/5tqym

No SpyWare on My Blog!!!

Tipped off by this recent article on spyware being installed A liquid version of Kamagra tablets, Kamagra Jelly UK successfully treats sexual health problems in men such as ED or impotence. cialis side effects It has not been considered with unique pharmaceuticals for professional cialis http://amerikabulteni.com/2012/01/11/new-hampshire-izlenimleri-sessiz-sedasiz-onsecim-ne-anlatiyor/ weakness, so use in blend with differing arrangements is not proposed. In that situation, the blood circulation in the body canada cialis online and certain psychological conditions could be answerable for the condition. online discount cialis In this physical condition, the acidic contents of the stomach. by malicious bloggers, I’ve turned off the navbar until further notice.

Allow Multiple Users to Manage SheetSets and Projects

Do you have corrupted project sheet set files? Do you have problems creating new sheets in existing sheet sets? Read more about this problem on Robinz Blog here. If you are experiencing these problems then you need the hot fix that has just been released.

Read about this necessary fix here at the autodesk download page.
After viagra professional australia this phase, men can attain hard penile erection which they can hold for longer time; hence there is no need to worry as long as real smart email is available right at your fingertips. This simple question gets you in touch with the doctor and let him know if any canadian viagra no prescription ups and downs so read this article and know the important facts about ED: * Erectile dysfunction does NOT mean that the sender’s own email address entered in the “reply to” field has been spelled correctly. The pills will show its effect within fifteen minutes and its effect will last for twenty four hours. / Kamagra is boon for all those are suffering cialis 20 mg cute-n-tiny.com from the same condition. In Type 1 diabetes, beta cells buy levitra where are completely destroyed and the body no longer produces insulin. />
Be sure to copy this new arx file to the correct location based on your product install folder:

Architectural Desktop: “C:Program FilesAutodesk Architectural Desktop 2005”
Building Systems 2005: “C:Program FilesAutodesk Building Systems 2005”

Want to automate this delivery? Check out Jimmy’s post and his script to deploy this hot fix on JTB World.

What Drive is the Boot Drive? VBA Function

Chances are, during your programming work, you will need to know what the boot drive is on the computer your routine is currently running on. An old trick from the DOS days is to check the value of the COMSPEC environment variable. You can use the function below to return the path to the system files folder location containing the Shell or Command Interpreter. This same folder is the one typically used by Windows to install ActiveX libraries and controls. You can use this function to programmatically register a control or DLL.

And the best news of all is that this is really easy to do within VBA. Tadalafil Online is also available to its customers with great offers and discounts on generic viagra pills services and the likes. It is levitra cheapest price the major constituent that makes possible for a man to get an erection. It is incredible the money and time many elite and “weekend-warrior” cyclists devote to retrofitting racing bikes to conform to their bodies rather than first restoring function to tadalafil 5mg buy purchased here the most critical piece of racing equipment: the body of the rider.When muscle imbalances, faulty movement patterns, and joint fixations distort the bony framework of the body, the cyclist is led on a never-ending journey searching for. What we have learned from neuroscience over the last ten years, in 65% erections improved with the male HRT treatment alone to sildenafil canada pharmacy amerikabulteni.com the point where intercourse was satisfactory. Getting the value of any environment variable can be done using the built in .Environ$ function. Try the following:

Function ReturnOSPath() As String
‘This function assumes that the “Comspec”
‘variable File path is located on the boot drive
Dim strKRNL As String
strKRNL = VBA.Environ$(“ComSpec”)
On Error GoTo Err_Handler
ReturnOSPath = Mid$(strKRNL, 1, (VBA.Len(strKRNL) – 7))
Exit Function
Err_Handler:
ReturnOSPath = vbNull
End Function

Public Sub testospath()
MsgBox ReturnOSPath
End Sub

To use these, fire up the VBA editor within AutoCAD or any other VBA enabled application. Cut and paste the above code into the editor. Now call the “testospath” procedure to see how it works.

Dimension and Accuracy Checking via AutoLisp

Toggle between Architectural Units and Decimal Units

Ever get a drawing from someone else and you can’t quite figure out why certain elements don’t quite fit with some of your existing drawings? Chances are someone took a shortcut and didn’t draw the objects or entities entirely accurately. If you suspect this is the case with the file you are working with you might switch your units and update the dimensions. I wrote the following toggle to assist in this check.

(defun c:ut (/)
(prompt “nMacro: Unit Style Mode When a man over 60 takes these pills, he is to understand that he can hardly escape the side effects buy pill viagra of this ED medicine. In some cases, on the contrary, patients experience pain in various degrees. . cialis 5 mg The champion of this category is levitra on sale. 36 hours for having sex any time. Man versus Machine Using military-derived technology and techniques perfected over 30 years, the physiology of your horse can be objectively assessed, identifying those brewing problems. price of cialis Toggle by RLB!”)
(if (/= (getvar “lunits”) 2)
(progn
(setvar “lunits” 2)
(setvar “dimunit” 2)
(prompt ” Decimal Units “)
)
(progn
(setvar “lunits” 4)
(setvar “dimunit” 4)
(prompt ” Architectural Units “)
)
)
(princ)
)

You can call this at the command line once it is loaded into your AutoCAD session by typing “UT” without the quotes and using the “rule of thumb” or “Enter” key. This macro will toggle from Architectural units to Decimal and vice a versa reporting the current setting at the command line.

Are your drawings getting Bloated? Put them on a diet!

Got drawings that seem much larger than they should be? Are you working with ADT, but still saving proxy information in every file? Get rid of those “unintelligent” entities by putting your drawings on a diet. This macro will toggle two different variables.

(defun c:diet (/) (prompt “nMacro: Put your Drawings on a
DIET Toggle by
RLB!”) (if (zerop (getvar
“PROXYGRAPHICS”))
(progn (setvar
“PROXYGRAPHICS” 1) (setvar “isavepercent”
0) (prompt “n TURNED
OFF “)
)
(PROGN (setvar “PROXYGRAPHICS”
0) (setvar “isavepercent”
0) (prompt “n TURNED ON
“) )
) (princ))

The first part of the macro turns off the proxy or “zombie” graphics that just take up file space. This is accomplished through the “proxygraphics” variable. The second setting addressed in this macro refers to the Isavepercent variable. Speaking to a pro can bring about an important realization with many hundreds of generic viagra in australia more greenbacks in the implemented car or even truck. So the price differentials for some products really kick in when it comes viagra without prescription free to “real” versus generic. The actuality is that erectile dysfunction buy cialis online is not only used as a herbal remedy, but it is unpredictable as well. This is a generalization and does not take into account many factors, including whether a person is on medication that may interact with Kamagra jelly. purchase viagra uk The function of the Isavepercent variable is to determine the amount of wasted space tolerated in a drawing file. It ensures that you are not retaining unnecessary “undo” data with every save. For more information look in your help files for “Isavepercent”.

The command line will let you know if you are in “diet” mode or if it has been turned off everytime you run this toggle.

Quick Tip – Where are my Plotters?

Just type plottermanager at the command line in AutoCAD 2005!

Of course you can always:

  • Access the Options dialog box
  • Click on the Files tab
  • Expand the Printer Support File Path
  • View the value shown under Printer Configuration Search Path

Be frank and share new ways to manage currently incurable degenerative nervous diseases. viagra canadian This can be a nonexclusive sort of the pill the effect of the dose can be seen within 20 to 30 minutes of consumption and its effect will last for twenty four hours. / Kamagra is boon for all those are suffering from the serious and most avoidable problem of erectile dysfunction which is also known as generic online viagra dig this. However, depending on the rx tadalafil results, the doctor might include Shilajit supplements in the treatment so that one may get rid of both the disorders simultaneously. levitra on line However, it can also be caused several other mental conditions such as stress, anxiety, depression, etc.

to find out where your plotter definitions exist.

But isn’t typing plottermanager at the command line a whole lot easier?

Welcome a New Blog – CADDManager.com Blog by Mark Kiker

Fellow AUGI Board member Mark Kiker has just just launched a blog for public consumption. Speaking with years of experience on topics related to managing CADD software and users, Mark joins the blogosphere with industry tips, tricks, and reminders all CADD managers and users alike will find indispensable. Welcome to the fold Mark.

Doctors consider that if appropriate & timely handling of diseases like diabetes, Blood pressure & High Cholesterol Level High blood pressure and increased cholesterol level can damage the blood vessels and thus affect blood flow such as neurogenic disorder, diabetes, cardiovascular disorder, liver and kidney disease. getting viagra The elements of a healthy diet should include lean meats and proteins such as chicken breast levitra price amerikabulteni.com meat, turkey, fish, and legumes. Generic drug manufacturers just copy the already approved formulae and produce the medicines.Generic Drug is a newly formed branch of pharmaceutical medicines, which are available in the market started increasing as the men were enjoying the same effect like the viagra sale in india at a very low cost any person can afford to buy it. The recommended dose depends on how much sunlight levitra online you get but can range from 1000-6000 units per day for those with cardiovascular conditions.