ADT

Walk and Fly are available only in perspective views.

Walk and Fly are available only in perspective views.

Richard Binning

All of a sudden, this dialog box started popping up again while performing a 3DOrbit inside AutoCAD Architecture.

Walk-n-Fly
Walk-n-Fly

After checking this thread for a solution and finding none, I offered the following:
Supply of blood to the penis become faster after viagra soft 50mg 30-60 minutes of taking this medicine and hence start working by providing erection.Side-effects: Side-effects that a person may feel nauseated, fatigue, indescribable pain and shattered. The center gives state approved and certified courses and driver education classes in Texas, and is the leading driving education provider in the country. viagra price in india Order Prescription generic cialis cipla to help address erectile dysfunction. Visit today to try out some of the most important goals of diabetic treatment. tadalafil 20mg cipla
Add the following to your section in your FixedProfile.aws

 <HideableDialog id=”VMToolsUI.WalkFlyToPerspectiveView” title=”Walk and Fly – Change to Perspective View” category=”Navigation” application=”” result=”1001″><Preview><TaskDialog Source=”/AcTaskDialogs;component/TaskDialogs.xaml” Id=”VMToolsUI.WalkFlyToPerspectiveView” xmlns=”clr-namespace:Autodesk.Windows;assembly=AdWindows”></TaskDialog></Preview></HideableDialog>

Make sure you do this while AutoCAD is not running, or the fixedprofile.aws file will get overwritten when you do close AutoCAD.

ACA: Double Click Schedule Table to Update

ACA: Double Click Schedule Table to Update

Richard Binning
Of course you can always set an AutoCAD Architecture Schedule Table to update automatically, but when you choose to leave that property setting set to no, it would be nice to be able to double click the table and have it update, rather than simply show the properties.  Since the updateschedulenow command is not directly available in the cui editor (it didnt appear in searches using schedule, or update keywords), you’ll have to follow these directions to create a double click behavior after creating a custom custom command.  Here are the steps:

  1. Access the CUI editor – Type cui and hit the enter key.

Flow of blood should always be proper so that erection can be proper and enjoyable to sildenafil cipla the man. It http://appalachianmagazine.com/tag/west-virginia/ levitra 60 mg generally involves counselling as well as psychological treatment can be administered to counter such cases. It is better to reduce your hypertension discount for cialis medicine gradually. There are many males who are facing a problem that is levitra 20 mg appalachianmagazine.com this particular drug initiates the blood flow and increases the higher chances of ED among the males.

  1. Choose the Main CUI – Use the selector to choose the main cui file
  1. Create a new double click action – Right Click on the Double Click Actions Node and choose Add new double click action
  1. Name it what you want, I named mine Schedules.
  1. Create your new command, by clicking on the star icon as shown in the image below.
  1. You will get the skeleton of a command created automatically as shown in the image below.
  1. Name your command Update Schedule Now – also add a description, the command display name and add the following macro:  ^C^C_ScheduleUpdateNow   You can select the OOTB icon from the selection provided as shown in the image below. It is named RCDATA_SCHEDULE_TABLE_UPDATE
  1. Now drag your new command to the Double Click Action and drop it on top of the node.
  1. Close the CUI editor to complete this task and update your main CUI with the new tool.

Flush your Undo – AutoCAD

Flush your Undo – AutoCAD

Richard Binning
As I roll out the 2014 versions of Building Design Premium, a designer sent me the following warning message from AutoCAD:

It will bring those young days back, when online viagra sales you loved outing. Generally, the jelly works in 20 buy viagra overnight minutes and show effectiveness for about 4 hours after consumption. Antibiotics like erythromycin, clarithromycin4. viagra online samples antifungal medications like itraconazole, fluconazole5. tuberculosis medications like rifabutin, isoniazid6. hepatitis C medications like telaprevir, boceprevir7. Buy Online Crestor UK for trouble cure of harmful high cholesterol and levitra 60 mg cute-n-tiny.com get rid of fatal consequences of tragedy. “A gentle word, a kind look, a good-natured smile can work wonders and accomplish miracles.” – William Hazlitt A wide smile, an ear-to-ear grin, a joyful laugh: these are all actions that denote happiness and satisfaction in life.
Warning! The undo file length is 1569321556 bytes.  Undo will be automatically disabled at 1750000000 bytes to prevent overflow…

Although I’m not sure what an UNDO Overflow would look like, rather than soil the carpets with all those abandoned and rolled back activities, I decided to investigate further.  I recommended that the designer saveas to ensure no data was lost and then began an investigation.

The solution:

  1. Use Saveas to write the file back to the harddrive or network location in case of a potential fatal error.
  2. Clear out the temp folder – Use %temp% in the file dialog and delete files found.
  3. Flush the Undo register – Type Undo – C – All

For more info refer to this Autodesk technical reference.

Autodesk Building Design Premium Deployment Modification – Verticals First

Richard Binning
I had to revisit some deployments I created recently to modify some content locations.  On any deployment that had both AutoCAD and an AutoCAD based vertical package (ACA or MEP), the deployment modification routine would hang when I tried to modify either the ACA or AMEP product if I had modified the support paths in the AutoCAD versions (AutoCAD or Struc Designer) first.I was able to restore the paths to default by modding the AMEP, then ACA, then Struc designer, then AutoCAD.  If you run into this, try modding the paths in the above order.

It is important that you try and find out more about Jason Long’s research and about the various topics you can always check this page you will find inside his guide.Now, that will cipla levitra help determine possibly the E.D Protocol is perhaps not a “magic remedy” even though this system can deliver pretty fast results, it really is important to comprehend that without dedication and efforts from you you probably won’t. It requires bulk generic viagra cooperation of both the partners. If the patient is still not reaching his desired results he should consider discussing a possible change in dosage with his doctor. tadalafil india online is an oral medication which one needs to take with normal water. Though, to persist with a healthy sexual life men wish to generic sildenafil uk http://cute-n-tiny.com/cute-animals/orange-eyed-kitty/ delight this male sexual dropping disease.

Hatch Origins to the Rescue

Richard Binning
Problem:   A designer calls and asks for a new hatch pattern for gravel.  Further inspection reveals that the standard gravel pattern was used, but when viewed it looks like many random intersecting lines rather than the rounded gravel pattern they were expecting.

It’s as simple as visiting the website today. buy canada cialis The instability of the menstrual volume, cycle and blood will overnight cheap viagra this site be affected as well. The market can also be segmented on the basis of each client’s discount generic cialis religious. In case of ED there are different factors vardenafil canadian pharmacy that include heart disease, obesity, etc.

Solution:  Pick the hatch pattern and use the edit hatch command. Pick a new origin point close to the hatch object. Click ok and watch your hatch magically restore itself.
Sometimes, hatch patterns do not display correctly when their origin point is a large distance away from the hatch itself. This occurs frequently in metric – imperial conversions.
Note: Watch out for masonry patterns. Ensure your new origin displays the correct masonry coursing.

Exploded Attribute Text will not be visible when referenced

Richard Binning
Remember to check your “Insert” options when bringing in blocks with attributes. You NEVER want to insert those type of blocks with the “Explode” option still toggled on.  Nevertheless, this is a frequent hurdle for designers who are not as familiar with attributes as they SHOULD be.What is confusing for designers is the fact that they can see the text and think it is a value, but it is typically the attribute tag they are seeing.  The typical steps they take to resolve before requesting assistance include:

  • They double check the entity layer, and find it on a plotting layer
  • They check the reference layer and find that it is thawed, on, and plottable.
  • It is visible in the drawing (xref file) where it is placed, but when that dwg is externally referenced into another file, the text values do not show.

Quick Fix:  Copy the tag name to the “default” value text box when editing the attribute definitions, then cut the definitions to the clipboard and reinsert using “Paste” as block.  Save your file, reload the xref, and your text will magically appear.

Best Practice:  Understand the difference between simple text/mtext and attributed blocks. Ensure that you don’t inadvertantly leave the “explode on insertion” option toggled on in the Insert block dialog box.

Some prostatitis viagra bulk buy patients are afraid if they have been suffering from other massive disorders, they must not make any utilization with such drug treatments since it would lead for fatal consequences. Correct treatment with help can help a person of the causes of cialis online mastercard divorce. The drug may result in further complication so steer clear of consumption of alcohol and fats as these tend to reduce the effects of pathological disintegration, especially when taken with a beta-blocker. top drugshop commander levitra In simple words, the wellness of reproductive has turned into a tough task now. viagra in the uk

Google Earth Color Drape on AutoCAD Mesh – The EASY Way!

Google Earth Color Drape on AutoCAD Mesh – The EASY Way!

Richard Binning
The google earth extension from autodesk labs makes it really easy to drape a google earth image over a 3D mesh inside AutoCAD.

Over the counter drugs have the benefit to choose from levitra uk various brands and also the advantage of discounts and offers. Which would be the best medicine for you? It is well known that when a relationship is failing, people like to tadalafil samples start new programs on a Monday, knowing that they will do fine, using willpower and visualization to see themselves through. This way cheap super viagra Tadalista assists a man to suffer from erectile dysfunction. During the latter days, unavailability of erectile dysfunction cialis sale medicines used to get men helpless for achieving true pleasure of sexual life.

Importing the Google Earth mesh (IMPORTGEIMAGE) results in a black and white overlay of the google earth image on your mesh.  According to the User Guide, The image will be black and white – a current limitation imposed by Google Earth.

Unfortunately, the image IS black and white as you can see above and draping your own color export has been somewhat difficult within AutoCAD Architecture due to the differences in the material editor.  Until Now that is!

Rather than struggling with the materials editor and image scaling, why not simply swap your images to get the color drape you’ve been looking for!

Import your mesh into AutoCAD Architecture 2011 after you’ve loaded the GE cui file (Note: Use cuiload and change the filetype to legacy cui to load the toolbar shown below, then click the import ge mesh tool and place your mesh. I used 0,0 and a rotation of 0.)

Now switch back to Google Earth and use the file menu to save the color image to your harddrive.

Notice that the color image exported and the automatic material created by the extension have the same image dimensions!
Now open the color image you exported and saveas overwriting the material image found in the local settings folder for your Acad installation.

Note: to find this image, enter the following path in your explorer address bar:

%userprofile%local settingsapplication dataautodeskaca 2011enu

Once you’ve saved as overwriting the original material, switch back to AutoCAD and issue the “MATERIALS” command.  Find the material listed in the properties for your mesh and double click it to update the material to full glorious COLOR! Watch the video below to see it in action!

See, I told you it was Easy! I hope this helped you!

 

Legacy VBA Error – For next loop may really mean If end if.

Richard Binning
I was updating some legacy VBA code today and had to add some additional logic to a function. When I click the run button, I was faced with this dialog box

They are not only expensive but also might not be of much help always, if the issue http://appalachianmagazine.com/author/appalachianmagazine/page/26/ viagra soft is purely psychological. This compound inhibits the activities of PDE5 which leads to erectile tadalafil canada mastercard dysfunction. Some males could not gain or maintain erection needed for a pleasing sexual prix viagra pfizer intimacy in the bed. Drug therapy is also a common and trusted treatment of male impotence. low cost viagra

A quick check of the code indicates that there IS a closing “NEXT” statement for the “For Each…” loop. When this happens to you, check any “If….” logic constructs within the “For … Next” loop. Chances are you’ll find a missing “End if” statement.

Get the AU Online Code!

Richard Binning

Many of you have attended Autodesk University and know the value of this fantastic training and networking event. But I know that many of you don’t get an opportunity to attend for many reasons. Since I have access to the training materials, I thought I would share the code with those who’ve never attended.

Going by the rising incidences of men suffering from erectile dysfunction even though older men are commonly afflicted by the ailment than younger that web-site viagra from canadian pharmacies men. They do not consider those women who really don’t have the best intercourse due to buy cialis brand undesired erection. The berries are extremely sensitive and must http://djpaulkom.tv/balls-thighs-and-bae-cooking-with-the-kom-for-super-bowl-sunday/ viagra discount india be frozen within 24 hours after harvest; if not the nutritional contents will be severely damaged. buy cialis from canada Erection-helping medicine is the best that helps men living pleasurable love-life; on the other hand a disturbed love-life is like a curse which can damage the peace mind and soul.

Here’s the deal: Send me an email stating why you want to experience AU through the online portal. I’ll select five people and then send them a link that will let them register and gain access to the thousands of classes, handouts, and screencasts. Don’t delay. This deal expires on June 1st, 2009.

ACA 2009 VBA Macro – Room Zoom Available

Richard Binning

R2009Find_Room_Zoom2.dvb is a VBA Macro that displays a modeless userform on the screen with a text box and a button labeled “Find”. When you enter a room or space number in the text box and click the “Find” button, it will cycle through all the available space/room objects in the current drawing and any attached xref files and zoom your display to center on that space or room with the corresponding number. This macro originated in Autodesk Architectural Desktop (ADT) R3.3 and is now updated for Autodesk AutoCAD Architectural (ACA) Release 2009.

order viagra It comes in a special square packet. Lawax capsule is developed using powerful herbs to cure early discharge. cheap cialis pills No solutions at the right period of time can lead to generika viagra poisoning of the nerves. So, the http://djpaulkom.tv/dj-paul-will-video/ overnight cialis tadalafil pharmaceutical industry is tightly regulated and price controlled by the Canadian government, resulting in very cheap, very affordable prescription drugs.

Take a look at the code within the macro to see how to:

  • Use the acfocus control (allows you to keep the form visible on the screen while you interact with entities within your file.

  • Find the schedule property and get the associated space or room object.

You’ll find more helpful utilities in past posts here and at AUGI.com, R U a Member?